First Strike Meters Model FS1
If you have always wanted a professional satellite finder meter but didn't want to pay the "BIG BUCKS", this is the meter for you. First Strike Meters are made for the professional but are easy for the Novice to understand and use. No more searching through complicated menus to find the setting you need to change. All required parameters show on one screen making it easy for the user to modify any setting.
Don't let the price fool you, the FS1 First Strike Meters satellite finder meter will give you all the signal measurements that you need to install or re-align your satellite dish at a price you can afford.
FS1 boots up fast (less than 2 seconds) then quickly and easily finds even weak signals. Unlike the competitors meters, you can do a slow sweep of the dish to find the signal.
All settings are on 1 screen.
Clearly shows when the signal is LOCKED.
Uses the same type display screen as cell phones so it can be read in direct sunlight. Display screen has a switchable back light so your meter can be used in low light conditions.
FS1 has a Global Data Bank that holds all the satellites in a separate data bank. The meter also has a User Defined Data Bank that stores 100 satellites. Entries in the Global Data Bank can be copied to the User Defined Data Bank and then easily edited to fit your needs. The user can define new entries from the keypad.
Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence.
Rechargeable Li-on battery lasts approximately 3.5 hours on a full charge. If the battery runs low during use, you can loop the satellite receiver through the meter and power the meter from the satellite receiver power supply. Meter housing has a battery door for easy access and replacement of the battery.
Universal charger operates on 120vac/60Hz or 220vac/50Hz making it usable anywhere. Easy change power plug.
Remember to Register your new meter.
Registered users can request our SatList. We provide a worldwide list of satellites to our registered users upon request.
See Tony Dunnetts report on FS1.
See Tony Dunnetts "Understanding and using the FS1"
Tony Dunnett is a world famous satellite guru from New Zealand.
First Strike Meters - FS1